Dyneon TF-9205
TF-9205为热降解工艺在德国生产的聚四氟乙烯微粉,不同TF-9207的乳液聚合工艺。TF-9205平均粒径为8微米,特别容易分散。所以在涂料和橡胶中特别适合。质量肯定是同类别中最好的。
没有中文资料,我只能够介绍到这里。
Technical Information
Processing recommendations
PTFE micropowders can be used as additives in many different applications and at
concentrations typically from 5 to 20%. Homogeneous incorporation helps ensure optimum
performance. Because of its small particle size coupled with good free-flowing properties, Dyneon
TF 9205 PTFE exhibits very good metering behavior and can be easily incorporated into other
materials – even in dry blends.
Supply Form
Dyneon TF 9205 PTFE is supplied in 25-kg cartons with polyethylene liner or large cartons
containing individual bags of 25-kg each.
Storage
Dyneon TF 9205 PTFE can be stored for a relatively long period of time. It should be kept in a clean
and dry place in its original unopened container at temperatures below 30°C (86°F).
Micropowder Properties*
Average particle size 8 μm ISO 13321
Bulk density 400g/l ASTM D4895
Specific surface area BET 2m2/g DIN 66132
Melting Peak Temperature 325ºC (617ºF) ASTM D 4591-97
Melt flow rate MFR** 12 g/ 10 min ISO 1133
Melt viscosity approx. 102 Pa • S calculated see footnote **
*Typical values (not for specific purposes)
**The measurements are carried out at 372°C (701°F) (test weight 2.16-kg, die diameter
1.0mm). The melt viscosity of micropowders can be calculated from the melt flow rate
(MFR) by Hagen-Poiseuille’s law to obtain an indication of molecular weight.
• Low molecular
weight PTFE
produced by thermal degradation
• Rigid particle morphology
Used as an additive to:
• Improve non-stick properties
• Reduce coefficient of friction
• Increase wear
resistance of matrix material